| Request a Quote | |
| Sign up for E-News | |
| Contact Us | |
 |
|
| Current News | |
| International Remediation Conference May 19-22, 2008 Monterey, CA H2O will exhibit at one of the world's leading environmental remediation conferences, the Sixth International Conference on Remediation of Chlorinated... » More Info |
|
| International Petroleum & BioFuels Environmental Conference Nov. 11-13, 2008 H2O Engineering will attend the 15th Annual International Petroleum & BioFuels Environmental Conference (IPEC), November 11-13, 2008 in Albuq... » More Info |
|
 |
Ancillary EquipmentWell Head Connection
 Well Head Connections (WHC) are made from the highest quality materials available to maximize success of in situ remediation treatments. The WHC features a Kynar® compression fitting, and a type 316 stainless steel inlet tee in a sealed Schedule 80 PVC body. A ¼” FPT access port is included to accommodate a pressure gauge for accurate pressure readings where they count the most. Well Head Connections are available for ½”or 1” H2O Engineering riser pipe sections. Any existing on-site 2” or 4“ monitoring well casing can be easily modified using our 2” or 4“ WHC fitting to accommodate our ozone sparge technology.
Product Specs:
WHC10 Well head connection for 1" Pipe and 1/2"OD compression fitting for tubing
WHC20 Well head connection for 2" Pipe and 1/2"OD compression fitting for tubing
WHC40 Well head connection for 4" Pipe and 1/2"OD compression fitting for tubing
Riser Pipe
Riser Pipe (RP) is an integral component of our complete In-situ Oxidation Point (IOP) system. Each Riser Pipe section is sealed with an ozone-resistant Viton® o-ring to insure no leaks occur while under pressure. Schedule 80 PVC is used for the durability and ozone resistance required for harsh field conditions that often exist for in situ remediation. Each 10-foot section is available in 1” ID.
Product Specs:
RP100 1.0" ID, 10-foot section, Schedule 80 with Viton® O-ring, and 1.0” x 8-TPI ASTM F-480
In Situ Oxidation Points
In situ Oxidation Points (IOP) were designed by our engineering staff exclusively for use with our ozone sparge units in the tough conditions of in situ remediation. Made from ozone-resistant PVDF (Kynar®), they are rigid by design and include a Viton® o-ring seal to assure the greatest radius of influence. These proprietary oxidation points provide maximum ozone transfer to the contaminated water table and soil. Efficient mass transfer means remediation takes place quickly and completely.
Product Specs:
IOP150-18 1.5" OD x 18.0"L, Viton® O-ring, and 1.0" x 8-TPI ASTM F-480 Male Flush Thread.
Download the Ancillary Equipment Sheet here. (PDF) Download the IOP Installation Inside Monitoring Well Casing Diagram (PDF) |
| Copyright © 2007 H2O Engineering Inc. Request a Quote | Newsletter Signup | Contact Us |